- Hydraulics Valve
- Hydraulics Pump & Motors
- Hydraulics Cylinder
- Accessories & Parts
- Continental Hydraulics (USA)
- Mini Power Unit
UEW Hydraulics & Engineering Sdn Bhd
21, Jalan Batai Laut 3,
Kawasan 16, Sungai Rasa,
Taman Intan,
41300 Klang,
Selangor, Malaysia.
21, Jalan Batai Laut 3,
Kawasan 16, Sungai Rasa,
Taman Intan,
41300 Klang,
Selangor, Malaysia.
+6016-359 2224
+6019-323 8038
+6019-323 8038
+603-3341 0997
P40 Monoblock Control Valve
Previous | 2 / 4 | Next |
Description
Manually or mechanically controlled hydraulic directional control valve §²40 is designed for distribution and control of work flow between generator (pump) and executive mechanisms (cylinder, hydro-motor, etc.). It is manufactured with 1 to 7 plungers, with parallel or serial action, with common or individual back valve for each plunger, with or without safety valve.
Construction
§²40 is a mono-block distributor. Its body is made of cast iron EN-GJL300. Plungers are made of carburized steel with hard chrome plating.
Mounting
The distributor is fixed with two bolts M8
Technical Specification
Manually or mechanically controlled hydraulic directional control valve §²40 is designed for distribution and control of work flow between generator (pump) and executive mechanisms (cylinder, hydro-motor, etc.). It is manufactured with 1 to 7 plungers, with parallel or serial action, with common or individual back valve for each plunger, with or without safety valve.
Construction
§²40 is a mono-block distributor. Its body is made of cast iron EN-GJL300. Plungers are made of carburized steel with hard chrome plating.
Mounting
The distributor is fixed with two bolts M8
Technical Specification
Ambient temperature | -40C...+60C |
Viscosity | 12 ...800 mm2/s |
Fluid temperature | -15C...+80C |
Filtration | 10 to NAS 1638 |
Max operating pressure | 315 bar |
Back pressure | 50 bar |
Nominal flow | 40 l/min |
Leakage(A,B-T) | 15cm3/min at 120bar |
Spool stroke | 6 mm |
Actuating force | < 200 N |
Modification/ Spools | with 1 to 7 |