Share:
Description
Manually or mechanically controlled hydraulic directional control valve Р80 is designed for distribution and control of work flow between generator (pump) and executive mechanisms (cylinder, hydro-motor, etc.). It is manufactured with 1 to 6 plungers, with parallel or serial action, with common or individual back valve for each plunger, with or without safety valve.
Construction
Р40 is a mono-block distributor. Its body is made of cast iron EN-GJL300. Plungers are made of carburized steel with hard chrome plating.
Mounting
The distributor is fixed with two bolts M8
Technical Specification
Manually or mechanically controlled hydraulic directional control valve Р80 is designed for distribution and control of work flow between generator (pump) and executive mechanisms (cylinder, hydro-motor, etc.). It is manufactured with 1 to 6 plungers, with parallel or serial action, with common or individual back valve for each plunger, with or without safety valve.
Construction
Р40 is a mono-block distributor. Its body is made of cast iron EN-GJL300. Plungers are made of carburized steel with hard chrome plating.
Mounting
The distributor is fixed with two bolts M8
Technical Specification
| Ambient temperature | -40C...+60C |
| Viscosity | 12 ...800 mm2/s |
| Fluid temperature | -15C...+80C |
| Filtration | 10 to NAS 1638 |
| Max operating pressure | 315 bar |
| Back pressure | 50 bar |
| Nominal flow | 80 l/min |
| Leakage(A,B-T) | 15cm3/min at 120bar |
| Spool stroke | 6 mm |
| Actuating force | < 200 N |
| Modification/ Spools | with 1 to 6 |
Inquiry - P80 Monoblock Control Valve
